Teradek BOLT 4K LT 3G-SDI 750 TX & BOLT 4K 12G-SDI 750 RX KIT

• Bolt 4K LT 3G-SDI 750 TX | Bolt 4K 12G-SDI 750 RX Kit
• Includes: 1 Bolt 4K LT TX & 1 Bolt 4K RX
• Video: Up to 4Kp30 (HDMI) / 1080p60 (SDI) when using the included TX *
• Range: 750 ft.
• Inputs: HDMI 2.0, 3G-SDI
• Outputs: 3G-SDI, 12G-SDI, HDMI 2.0
• Multicast: Up to 6 RX
• Compatibility: All Bolt 4K Series TX/RX Devices

ZERO-DELAY 4K WIRELESS VIDEO

Transmit and receive images at a line-of-sight distance of up to 750ft (228m) with no image delay (>0.001sec).

Transmitter:

• Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)
• Output: 1x 3G-SDI (up to 1080p60)
• Lightweight Body with Versatile Mounting: M3 / ¼”-20

Receiver:

• Output: 1x HDMI 2.0 (up to 4Kp60), 2x 12G-SDI (up to 4K60)
  *Output is based on signal from TX. The Bolt 4K LT TX included in this kit has a maximum resolution of 1080p60 via SDI and 4K30 via HDMI. The included RX will therefore receive a maximum signal of 1080p60 via SDI Mounting: ¼”-20

TRUE HDR

Supports Rec 2020 HDR in 10-bit 4:2:2 colour gamut. Sends and receives Log-enabled camera signals with wide dynamic range to monitor and achieve balanced highlight and lowlight regions with accurate colour reproduction.

EXCEPTIONAL WIRELESS PERFORMANCE

Reliable signal transmission and reception over 13x 40MHz frequencies. Upgraded hardware and less image break-up than previous Bolt generations. Fast reconnection times, automatic signal-quality switching, and a more robust frequency-hopping algorithm. An additional 5GHz radio-frequency link is available for high-traffic locations with excessive interference from other wireless devices.

SEND SIGNAL UP TO 6 RECEIVERS

Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.

UNIVERSAL CROSS-COMPATIBILITY BETWEEN ALL BOLT 4K DEVICES

Send and receive signals between any Bolt 4K series of devices for expanding workflow requirements.

CAMERA METADATA

Transmit metadata, timecode, and start/stop flags from most camera manufacturers.

BOLT APP FOR ANDROID AND APPLE IOS

Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.

*RX output is based on signal from TX. The Bolt 4K LT TX included in this kit has a maximum resolution of 1080p60 via SDI and 4K30 via HDMI. The included RX will therefore receive a maximum signal of 1080p60 via SDI