Coemar LEDko +(Daylight Studio)
Designed with new electronic and a new OLED display, this spot profile projector is the evolution of the Tungsten. The + electronic with advanced LED controller enables a smooth
dimming and it offers and higher luminous efficiency.Very quick setup of the functions thanks to the potentiometer knob.
Call for price
Specifications
- Fixed white CCT 5.600 K
- CRI 96, TLCI 98
- 8 or 16bit, 5 selectable curves: Exponential, Logarithmic, Linear, Halo and Standard
- Fast, Slow and Very Slow Dimming Smooth Selection
- Synchronized, random or pulse electronic strobe
- Four blade framing system, each shutter blade is adjustable for radial position and angle
- Swappable lens tubes between 5°–90°
- Camera flicker control/Hz range from 600 Hz to 20.000 Hz
- Calibrated Cob
- Pattern projection
- Pattern size: A or B
- Ambient Operating Temperature from 0°C to 40°C (from 32°F to 104°F)
- 4 different fan settings: Silent, Studio, Auto, DMX Regulated
- Manual Yoke, Pole Operated Pan-Tilt-Zoom (Accessory)
- Flame-retardant technopolymer reinforced with fiberglass
- Four stainless steel shutter blades in a two-plane assembly, 0.40mm (AISI 316)
- Thermally insulated knobs and shutter handles
- IP20 (available IP65 LEDko EXT Series)
- Black body (standard), custom color on request (optional)
Light source
Daylight COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
- Length: 362mm / 14.25in (body) – 601mm / 23.66in (with Profile Zoom 28°/40° optic)
- Width: 212mm / 8.35in
- Height: 189mm / 7.44in – 372mm / 14.64in (with bracket)
- Weight: 6kg / 13.22lbs (body) – 8.5Kg / 18.74lbs (with Profile Zoom 28°/40° optic)
Control protocol and programming
- DMX-512, RDM (Remote Device Management), Wireless (optional by LumenRadio)
- RDM configuration
- DMX Channels: 5 / 1
- Graphic OLED with on-board selector for quick setting
- Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
- 85-264V, 50/60Hz, auto-sensing
- 200W Maximum – 0.92 A at 230, 1.83 A at 115V – cosφ 0.95
- In and Out PowerCON TRUE1 Top connectors, 2 m (6.6 ft) PowerCon cable without power plug
- In and Out DMX 5 pin locking XLR connectors
Accessories
- 1.5 m power cable with PowerCON TRUE1 Top and bare ends, included (GKIT17, USA / GKIT16, EU)
- Metal Gobo Holder (BC10011A106)
- Optics: Profile/Soft Profile, Zoom Profile, Lens tube available in various angles
- Front Barrel with Burnished Blades (BC10011A000)
- 4-Leaf Barndoor (BC10034A003)
- Magnetic Gobo Holder (BC10011A006)
- Gobo Holder for Glass Gobo (BC10011A030)
- Iris (BC10011A010)
- Gobo Holder for Iris Slot (BC10011A049)
- Hook Clamp available in various models
- Light Clamp available in various models
- Clamp available in various models
- Wireless Kit, LumenRadio (BC10011A100)
- Pole Operated Yoke (BC10011A150)
- Donut available in various sizes
- Half Top Hat available in various sizes
- Top Hat available in various sizes
- Color Frame Holder available in various sizes
